• Timken Tapered Bearing Cup & Cone Kit - Set 403 (594A / 592A)

PART NO : AP0646KT                    
 


SET 403 (594A / 592A)
Timken Inner Cup & Cone Bearing Kit

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

MERITOR EQUIVALENT :
AP0646KM​


APPLICATION
Eaton
Mack
Meritor
Rockwell


SPECIFICATIONS
Cup Part Number  :  592A
Cone Part Number  :  594A
Design Units  :  Imperial
Bearing Weight  :  2.5kg
Cage Type  :  Stamped Steel

DIMENSIONS
d - Bore  :  95.250 mm
D - Cup Outer Diameter  :  152.400 mm
B - Cone Width  :  36.322 mm
C - Cup Width  :  30.163 mm
T - Bearing Width  :  39.688 mm

ABUTMENT AND FILLET DIMENSIONS​
R - Cone Backface "To Clear" Radius1  :  5.080 mm
r - Cup Backface "To Clear" Radius2  :  3.30 mm
da - Cone Frontface Backing Diameter​  :  103.89 mm
db - Cone Backface Backing Diameter  :  113.03 mm
Da - Cup Frontface Backing Diameter  :  145.03 mm
Db - Cup Backface Backing Diameter  :  134.87 mm
Ab - Cage-Cone Frontface Clearance  :  2.3 mm
Aa - Cage-Cone Backface Clearance  :  3.8 mm
a - Effective Center Location3  :  -2.5 mm

BASIC LOAD RATINGS
C90 - Dynamic Radial Rating (90 million revolutions)4​  :  56000 N
C1 - Dynamic Radial Rating (1 million revolutions)5​  :  216000 N
C0 - Static Radial Rating​  :  319000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6​  :  42400 N

FACTORS
K - Factor7​  :  1.32
e - ISO Factor8​  :  0.44
Y - ISO Factor9  :  1.36
G1 - Heat Generation Factor (Roller-Raceway)  :  151
G2 - Heat Generation Factor (Rib-Roller End)  :  36.8
Cg - Geometry Factor  :  0.142


BEARING LIFE CALCULATION TOOL

 

Write a review

Note: HTML is not translated!
    Bad           Good

Timken Tapered Bearing Cup & Cone Kit - Set 403 (594A / 592A)

  • Brand: Timken
  • Product Code: AP0646KT
  • Availability: In Stock
  • $140.80
  • $112.20

  • Ex Tax: $102.00